Arnica Heating and Air Conditioning, Inc

Blog Component

When You Should Go for Furnace Installation in Staten Island and Manhattan

furnace installation in staten island

So, you are done with your old furnace? Last few years, you called in the experts a number of times in the hope that the system will last a few more days, and it’s not just happening. Let’s face the truth. Any device, no matter what brand you have, can encounter several problems at certain juncture of its life span.

No matter how hard you try to restore its functionality fully, after a few days, it starts to behave the same way. So, what’s the point investing on repair and maintenance. Yes, repair and care is necessary, but that’s only when it is repairable. But, what if it turns out to be a costly repair every time. So, it is high time to replace the old rickety system and invest in a new furnace installation in Staten Island. A new system always increases the energy efficiency and comfort levels.

To do so successfully, all you need to do is to call in experts who have knowledge and expertise to install a new furnace.

Factors to Consider Before Installation: Usually, combustion furnaces last for 15 to 20 years. Hence, make sure that you choose the right system that fits your needs and your home perfectly:

Size: The heating needs vary from home to home. Installing to big a system or too small one won’t help. So, it is imperative to work with a trained professional who can suggest the right size you need for your home. This calculation is determined through the following aspects:

  • Your home’s orientation
  • Levels of insulation
  • Floor plan
  • Number of occupants
  • Number and type of windows and doors
  • Square footbage

Once the heat load calculation is done, you will be clear about the size of furnace you need.

Type of Furnace: Furnaces are usually available in two types - electric and combustion. Other than natural gas, combustion furnaces also use propane and oil. On the other hand, electric furnaces are perfect for homes that do not have access to fossil fuel or oil.

Energy Efficiency: All new furnaces available today are highly energy efficient. The energy efficiency is usually determined by AFUE. It measures the amount of fuel being used to generate heat.

Why waste time. Call in experts for furnace installation in Manhattan and enjoy this winter at home in warmth and comfort.

How To Make The Best of a Commercial Heating Installation in Brooklyn and Manhattan

Commercial Heating Installation Brooklyn

When it comes to a heating unit in the commercial setup, timely maintenance is something that is often overlooked. In most cases, once a heating installation in Brooklyn is completed in a commercial set up, they hardly find time to take a look at it. What most commercial owners fail to understand is that it is the regular servicing that helps in keeping the commercial units in good shape and great working order. If you talk with any of the experts, you will know that there are a few simple procedures that can keep the commercial heating unit in perfectly good health. It is not only going to save you a lot of money on costly repairs, but it will also probably keep purchasing a new heating unit at bay.

What Are The Small Things That Makes a Big Difference?

Not very big things, but small differences go in making a substantial difference to the long life of a heating unit. Following are some of the things that one needs to carry out after a heating installation in Manhattan.

A Regular Maintenance Should Never Be Avoided - That is a true thing especially if you are looking forward to many years of service from the heating unit. Also, experts who have been carrying out heating installation in Manhattan are of the opinion that regular maintenance takes the heating unit a long way. If there are problems with the heating unit, then the unit might release harmful gases or bring down the air quality. This might lead to issues with the residents of place or employees and staff members if it is a commercial building.

Commercial Heating Installation Manhattan

Change The Air Filters if Required - Often, homeowners are not aware whether they should consider changing the air filters or not. Dust and dirt accumulates on the air filters and compromises on their working efficiency. It is better to run a thorough check of the filters and if they are found in a bad condition, then a replacement should be done. Filters if cleaned properly should end up to be good for six months. Post that, run a check and replace if needed.

Run a Check of The Evaporator Coils - It is also crucial to run a check of the evaporator coils as well. They too accumulate dust and dirt over the time, and if there is moisture retention, then there can be mold growth as well. The coils should be kept clean and the exterior condenser coils also needs to be checked for wear and tear.

In a commercial setup, maintenance and servicing often gets overlooked. It is not enough to run a check on own. That is why a technician who can handle the issues needs to take a look at the same. They will not only look into the filters and evaporator coils, but also the fan, bearings at belts and other vital parts of the unit.

What to Do to Keep Furnace Repair in Brooklyn Restricted to a Small Number

Have you ever thought that if the furnace goes for a toss at a time when you probably need it the most who is to be blamed? Can you really put the blame on the furnace for giving up on you at the most inappropriate time? Go back and try to figure out when was the last time you had serviced the furnace. That probably could be the culprit why your furnace has given up on you. Getting a furnace repair in Brooklyn is going to cost you money. You can probably save a lot on that if you adhere to some basic furnace maintenance tips.

What Are The Basic Furnace Maintenance Tips

Keeping the furnace in shape is not a big deal as there are technicians who can help with the maintenance. One can also try and keep it in good shape, but when it comes to professionalism, it is better to call in a company that has prior experience in furnace repair in Staten Island. Most homeowners are often not aware of what basic furnace maintenance tips one should adhere to. That is where the technicians can help. They can answer some simple questions related to the furnace which can help with the scheduling the maintenance.

When Should a Furnace Maintenance be Scheduled

Rightfully, it is better to schedule a furnace maintenance at least once a year. It is advised to get that done before the Summer season begins.

How To Carry Out Furnace Cleaning

A furnace has three parts which needs to be cleaned from time to time. That is the filters, the blower and the blower motor.

Changing the furnace filter depends on the type of furnace one has. The technician can run a thorough check up and suggest what is the right time to change the filters. If they are too dirty and clogged, the filters would require quick change or else the efficiency of the furnace would be compromised. If the filters are too dirty, then it makes sense to get them replaced.

Cleaning the vents is equally important as dust and debris can build up quickly in the vents which might lead to blockage of airflow. The surface of the vents can be easily cleaned, but for a deeper and thorough cleaning, it is better to call a technician.

Cleaning the blower motor is not an easy job and is better left to the professionals. This requires removing the access panels that covers the filters and then cleaning the belts, motor, pulleys.

Following a simple maintenance routine will help in keeping all the trouble out of your furnace and boiler.

Issues to Look Out For in The AC Unit After Ductless Air Conditioning Installation in Queens

Both homeowners and commercial space owners need to be aware of one simple thing, and that is whether it is a central ac unit or a ductless air conditioning unit, it will give one trouble after a certain period of time. Just because you have opted for branded ductless air conditioning installation in Queens, it does not come with a guarantee that you will not have any hard time with it. Just like any electronic equipment, a ductless ac unit will also malfunction with time. As a layman you might not be able to make out the trouble signs, and that is when you will need to get a technician to look at the same.

How To Tell That The AC Unit is Malfunctioning

There are some very obvious signs that tell that your ac unit is not working fine. Before the technician shows up, try and see whether the ac unit shows issues in the areas. If it does, then you can be sure that there is some problem with the ac unit.

The air filters - Believe it or not, but air filters are an important part of the ac unit. They need to be kept clean all the time. Clogged air filters not only hamper perfect airflow, but that will also make the ac unit to work harder thereby bringing down its efficiency to a great extent. With proper maintenance and servicing, you would be able to ensure that the filters are in great shape and working just fine.

Thermostat - The programmable thermostat helps to keep the temperature in check. They help to adjust the same so that your home or office is neither too cold, or too hot. It also helps in energy savings and hence needs to be kept in good shape. If there is a problem with the thermostat, make sure to get it right.

Outdoor Unit - This is often the neglected part as it is placed outside. Often the condensing unit placed outdoors is clogged by dust, debris and vegetation overgrowth. It also undergoes the thrashings of the elements. That is why it needs to be checked from time to time.

Temperature Fluctuations - If the ac unit is not too old or worn out, then it should be cooling your home or office just fine. If it is taking longer than usual, then you must understand that trouble is brewing.

Breakers are tripping - Not too much of a concern, a breaking tripper can be fixed easily. But if there are frequent trippings, it will make sense to get it inspected by a technician.

A ductless air conditioning installation in Staten Island is an investment in the long time. Most importantly, it is more than just a luxury nowadays. It is better to get it maintained and serviced on time to keep it working just fine.

Efficacy of Ductless Air Conditioning Installation

Keeping the temperature inside one’s home controlled and at an optimal level happens to be of paramount importance. Unfortunately, a number of individuals fall for the promotional messages and end up buying an AC that is not suited for one’s home. It is definitely wise to check the pros and cons carefully before taking the final decision therefore. Simply visiting a showroom and spending an enormous amount on a new fashionable HVAC system is not likely to benefit the user. It is best to examine each option and check out the top companies that provide cost effective installation and maintenance.

Sure, there are many varieties to choose from when it comes to purchasing an AC. It might help to consider ductless air conditioning installation in Queens though as this particular type can prove to be the most effective in the long run. True, it had been ignored lately due to the rush for buying central air conditioning units. However, it is advisable to check out the facts before deciding one way or the other.

ductless air conditioning installation in Manhattan

Ductless Air Conditioners: Plus Points

Overheads: Making do with an old AC unit that works sluggishly for a long time without cooling satisfactorily is a strict no-no. Upgrading to a new one and asking the technician for ductless air conditioning installation in Manhattan can definitely help to cut the household costs substantially. The new energy efficient unit will not only function effectively allowing the room to become cool within minutes. There is no need to keep the machine running for long hours either. The cold air remains trapped inside once the doors and windows are kept shut thereby decreasing the energy wastage. The next utility bill is sure to be drastically reduced as well.

Eco-Friendly: Installing single units for each individual room can help to curb the energy wastage considerably. Cooling an unused room is unnecessary therefore. The total energy loss is thus much less when a ductless AC is used. The carbon footprint is also reduced greatly enabling the users to do their bit for the environment.

Sure, an individual can install an expensive central AC and cool all the rooms of the home simultaneously. Unfortunately, it may not be enough. While people in certain rooms may feel too cold for comfort, the other rooms would have its occupants suffer due to insufficient cooling. It definitely makes sense to get a ductless unit instead for it can be controlled individually for each room thereby maintaining the right temperature across the home.

Know the Trick Of PTAC Installation And Enjoy the Comfort Within Spaces

Taking the decision of installing the PTAC units in homes or office spaces is the most convenient option as nothing can cool or heat as efficiently as the PTAC units can. And since the complicated ductwork can be avoided PTAC air conditioning Installation, Brooklyn is favored in all spheres. However, it is a tricky endeavor, and hence specific factors must be considered before progressing further.

Evaluating the Location Before Installation

Irrespective of the fact where you install, the particular location is going to put forth specific challenges on its own. While replacing an older model, make sure to evaluate the specifications so that the same sized model can be fit in. However, for the first time installers, one must allow the professional contractors run a regular audit to ensure that the correct sized model is being installed.

Keeping the Installation Process Secured

To get optimum operation, it is essential to provide an anchored, and stable installation as the longevity of the product depends a lot on this. There are certain preparations needed which are understood by the contractors who have been doing this for long. These PTAC units require wooden studs to ensure secured installation and the lintel must be taken care of as it will give the right support while it is hung on the wall. Level the unit entirely from any angle can lead to water damage in the room.

Noting Down the Power and Outlets

At times people have to replace their existing PTAC units, and while doing so, the right power must be ascertained as the old unit is plugged out and the new unit is being plugged in. Any difference in the voltage can leave a profound impact on the new unit, and your comfort might be at stake. Also while carrying out PTAC air conditioning installation Manhattan, make sure the wiring and outlet can handle the voltage. Only expert electricians can be trusted before installation as the upfront cost needs to be brought into consideration. Any electrical hazard might lead to fire creating havoc which is not expected at all.

There are some product manuals which needs to be referred as well, and only expertise of the professional contractors is to be trusted. Invest smartly while buying a PTAC unit and enjoy the comfort it provides.


PTAC- Setting New Standards In Commercial Sphere of Heating and Cooling

As opposed to the conventional heating and cooling units, the commercial and hotel industries are now using the PTAC units since they have multiple advantages. Engineered for quieter performance, these PTAC units have got a compact design and come with an easier service. Also, the key components can be easily accessed, and the service even gets faster. However, there are certain facts that everyone must know before progressing with a PTAC air conditioning Installation Manhattan.

The Key Features of PTAC Units That Makes the Difference

  • Often the exterior portion of the PTAC units is subject to exposure to moisture. As most of the PTAC units are made of stainless steel end-plates, the outdoor coil would not receive any corrosion with time.
  • Durability has been the key factor that has made the PTAC units more accepted. As most of the reputed manufacturers make sure to use the galvanized zinc coated steel walls, which undergo an 11 step preparation process, the customers get exceptional durability.
  • Most of the PTAC units are now integrated with the Internal diagnostic programs which alert when maintenance is needed or when any specific components fail. Hence the PTAC air conditioning repair Manhattan has been facilitated and also the diagnostic are completely solved.
  • To make these modern units energy efficient, several new technologies have been designed, and there’s an integrated occupancy sensor which has five distinct energy presets. So the remote management capability has got better, making the unit's energy efficient to its extreme.
  • The modular product designs in the modern groups ensure that all the PTACs can be easily repaired and maintained. Also, the entire wiring has been made simpler so that the intricate complications can be avoided and the unit can be repaired fast enough at the hours of need.

As the temperatures keep soaring, people especially want superior level of comfort not just when they are in vacations, but also in daily life. As a result of this, the hotel industries have made the use of the PTAC units more popular. As technologies get better, it is the service that keeps making the changes every day.

Benefit of Furnace and Heating Installation and Repair in Brooklyn and Manhattan

 furnace installation in Brooklyn

Without regular maintenance and servicing, your furnace can quickly wear out. It is not something that you can avoid, neither expensive that you cannot afford. You can consider the service instead of replacing the whole system. Proper maintenance will also keep your furnace system in good shape. Since efficiency is the key to saving money on heating bills, getting it regularly serviced can be safe. If not properly maintained, there could be a source of carbon monoxide leak. So, seek the experts help for repair and furnace installation in Brooklyn.

Regular cleaning is required to keep the system in top working order. To ensure this, you might want to hire someone who can perform the job by replacing the air filter and cleaning the filter system, motor, and blower. If you are cleaning it yourself, you may use a toothbrush to clean the fan blades and any other small areas accumulating dust. However, it would be apt to seek professional help that comes equipped with advanced tools and devices.

Before executing heating installation in Manhattan, they make sure that there is no powerful to the appliance. They are thoughtful about your safety so they shut off the gas to the furnace by locating the knob near the gas line. The knob should be turned off so that it can sit perpendicular to the line to shut it off. It is not safe to open the furnace door, and vacuum in all the crevices your vacuum attachment can reach. Then the experts remove as much debris and dust as possible. After cleaning the actual unit, they make sure that the area around the furnace is clean and clear of clutter as well. If there are flammable liquids nearby or even in the furnace room, they are safely taken somewhere else.

Once debris is removed, the old filter is removed and replaced with a new one. One should make sure that the filter on the heater should be replaced monthly during the heating season. Let the experts check all fan belts. This is something that actually helps the furnace blower operate. If the experts find that the furnace is running but no heat is being pushed through the vents, they will surely check for broken or worn fan belts and have them replaced with new one if the former looks frayed, cracked, or worn. One can check the tautness of the belts by pushing on the center of the belt. If the belt gives more than an inch, the belt needs to be tightened by adjusting the attachment bracket.

When Replacing the Boiler is Not Just a Choice, But a Compulsion

boiler repair in Queens

Knowing when to replace the boilers is indeed a tough decision, however expert advice can make things easier. Mostly when the boilers are installed, the owners do not think of replacement services as such. They look for repair works and regular maintenance, but there’s much more to it as well. Nowadays, most of the boilers have been designed to last for 15 to 17 years on an average, and along with the time, it starts operating less efficiently. Not only the parts of the boiler start wearing out, but also the maintenance and boiler repair in Queens charges keep increasing along with time. Hence, the basic thumb rule for boilers is to replace them after every 15 years.

So considering the replacement of the boilers, determining its age is of utmost priority. Asking the manufacturer the details of the unit can give you the perfect age, but apart from this, there’s another trick which can help you determine the age of the boiler. All you need to do is check out whether the boiler has got any pilot light or not. If it doesn’t, the age of the boiler is definitely over a quarter of a century.

Another way your boiler gives you hint for replacement is compelling you to go for quintessential repair works frequently. The occasional wear and tear will be reasonable, but when these normal things keep occurring often, the signs aren’t favorable for your furnace. Also, the current value of the unit needs to be known before carrying out the boiler repair in Staten Island because if the repair cost exceeds 50 percent of the current value, then such an investment is not considered worthy.

Over the time, the different parts of the equipment ages, and hence the safety of the construction might get risky. Hence when the boiler starts cycling more frequently, that is another sure indicator of changing the entire unit. However, this is not a sure sign as well, because it is considered to be the most common problem as well. Call up the repair specialist contractors, and they are the safest way to pull the trigger.

What to Do When The Home Requires a Boiler Repair in Staten Island

Boiler Repair in Staten Island

There are a number of factors that may interrupt the normal functioning of a boiler. And a boiler service expert is the best person to help homeowners reduce the chances of frequent breakdowns, errors as well as other common issues.

What to do when the boiler faces a problem?

Responsible for both hot water and central heating, the boiler is one of the most significant parts of a home that homeowners rely on. The tasks of boiler maintenance and boiler repair in Staten Island should never be compromised. It should never be done by anyone who is not adequately knowledgeable, qualified and trained. Calling a reputed boiler repair pro would leave the homeowners to rest assured that the issues will be fixed with the utmost professionalism.

How to get ready?

A broken and/or non-functioning boiler can cause serious disruption in the house. But all these troubles can be well handled and even alleviated by taking proper, necessary steps to get ready for such an unwanted situation. Keeping the boiler in a good shape by having it properly maintained and serviced regularly is the best way to avoid costly repair. Boiler lifespan can also be improved by limiting its usage. Putting extra and unnecessary pressure on the boiler can notably increase the risk of the breakdown in future. So limiting the usage can be really beneficial to ensure better, healthier and longer life for the boiler.

How to have the repair done?

Besides taking all required precautions, it is also required to perform a quick research to locate the most reputed and professional boiler repair service in any particular area. For example, residents of Queens should look for experts in boiler repair in Queens. It is never recommended to carry out the job of boiler installation or repair without calling a professional. A DIY approach may not be fruitful in this regard. Rather that can be really dangerous. It can also invalidate the insurance policy if any. A dependable HVAC expert is the wisest option to get the repair job done.

What to do to avoid trouble?

The best way to avoid any sort of trouble with the boilers in future is to have it regularly and properly maintained and serviced by professional. It ensures better functionalities as well as better efficiency. It also ensures saving the good amount of money on regular energy bills.

View older posts »



There are currently no blog comments.